 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
Available KitsS2B: The total luminous power of 2 bars gives an output equivalent to a 1000W high pressure sodium (HPS) light.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
| Bar height above plants | 12 to 18 in. (0.3m to 0.45m) |
| Light coverage area | 4’ x 4’ (1.2m x 1.2m)* |
* Depending on the type of plant and the desired result.
S4B et S5B kits:
S4B and S5B kits are designed for plants with lower light needs. Please communicate with a representative to check which kit would best fit your needs.
Luminous Output
Total photosynthetic photon per unit of time (per bar)
| S2B: |
124 umol/s
|
| S4B: |
64 umol/s
|
| S5B: |
53 umol/s
|
Electrical Characteristics
| Operating Voltage |
220V
|
| Operating Frequency |
50Hz - 60Hz
|
| Typical Power Consumption |
430W
|
Cooling Characteristics
| Minimum water quantity to cool one kit at room temperature (70oF / 20 oC) |
11 gallons (40 liters)
|
| Corresponding rise in temperature |
45oF (25oC)
|
The light output of LEDs depends of their internal temperature. Please read the document "Cooling of the TI-SmartBar " available to obtain the best results with your TI SmartBar.
Weight and Dimensions
| Bar | Ballast | |
| Weight | 1.9kg (4.2lbs) | 2.5kg (5.6lbs) |
| Length (A) | 545mm (21.5in) | 200mm (8in) |
| Width (B) | 75mm (3in) | 200mm (8in) |
| Height (C) | 50mm (2in) | 75mm (3in) |
Other Characteristics
| LED estimated life span | >50 000 hours |
| Light output maintenance after 50 000 hours | 70% |
| Operating LED bar operation | lighting downwards |
| Maximum surface temperature | 140ºF (60oC) |
| Operating temperature | 50oF to 104oF (10ºC to 40 ºC) |
| Run-up time (100% of final value) | less than 2 seconds |
| Re-strike delay | negligible |
